New machines
Used machines
DMG MORI
CTX beta 1250 TC 4AUsed machine
Article number
89-001818
Category
Lathe
Sub Category
CNC turning and milling centre
Location
CNC Outlet Center
Briefly
Year of manuf.
2014
Control
Siemens 840 Dsl - Operate
Turning diam.
mm
340
Turning length
mm
1185
Technical specifications
In General:
Year of manufacture
2014
Control system
Siemens 840 Dsl - Operate
Swivel diameter
540 mm
Turning length
1,185 mm
Bar capacity
67 mm
Main spindle:
Technology
Direct drive spindle
Speed
5,000 rpm
Power
32 kW
Torque
360 Nm
Bar capacity
67 mm
C-axis
0.001°
Chuck
Hainbuch Spanntop Axfix 65
Hydraulic clamping
Differential pressure clamping
Clamping cylinder
Hollow clamping cylinder
Coolant supply
External (chuck flushing)
Sub spindde:
Technology
Direct drive spindle
Speed
5,000 rpm
Power
32 kW
Torque
360 Nm
C-axis
0.001°
Chuck
Hainbuch Spanntop Axfix
Hydraulic clamping
Differential pressure clamping
Coolant supply
External and internal
Tailstock function
Mechatronic control of the sub spindle
Tool carrier I (X/Y/Z/B):
Technology
Milling spindle on a travelling column
Milling spindle speed
12,000 rpm
Max. power
22 kW
Tool holder
HSK 63
X-axis
450 mm
Y-axis
200 mm (+/- 100)
Z-axis
1,200 mm
B-axis
+/- 110°
Position measurement systems
Direct (glass scales)
Tool carrier II (X/Y/Z):
Technology
Tool turret on cross slide
Tool drive
Direct drive
Speed
10,000 rpm
Power
14 kW
Torque
34 Nm
X-axis
195 mm
Y-axis
80 mm (+/- 40)
Z-axis
1,200 mm
Tool holder
VDI 40
Number of tool stations
12
Steady rest
SLU2X turret steady rest, 8–101 mm
Tool magazin:
Technology
Chain magazine
Number of stations
80
Tool changer
Double gripper
Equipment:
Position sensors
Direct in X1/Y1/Z1/X2/Z2/Z3
Chip removal
Chip conveyor
Coolant supply
CTS system, 20 bar
Tool monitoring
Easy Tool Monitor
Tool measurement
Tool setter, Renishaw
Part removal
Part gripper, conveyor belt
Bar feeder
Interface
Emulsion mist separator
Mechanical
Software option I
5-axis simultaneous milling
Software option II
Off-centre turning and milling
Software option III
Alternating spindle speed
Chucks
2x Hainbuch Spanntop
Description
This used DMG MORI CTX beta 1250 TC 4A is a highly flexible CNC turn-mill center for demanding complete machining of complex turned and milled parts. With main spindle and counter spindle, powerful milling spindle, B-axis and an additional lower tool turret, the machine offers ideal conditions for productive multi-sided machining in a single setup.
A particularly interesting feature is the SLU2X steady rest with a clamping range of 8?101 mm, mounted on the lower tool turret. This makes the machine especially suitable for machining longer or slender shaft-type components, where additional support during turning or milling operations is essential. The steady rest can be used directly via the turret and supports stable, low-vibration machining ? a clear advantage for precision shafts, spindles, axles and other longer rotationally symmetrical components.
Another key strength is the machine?s capability for complex milling operations. The milling spindle with HSK 63, 12,000 rpm, 22 kW power and a B-axis of ?110? enables demanding turn-mill operations up to 5-axis simultaneous milling. Complex contours, angled holes, freeform surfaces and multi-sided machining can therefore be carried out efficiently on one machine. The CTX beta 1250 TC 4A combines the productivity of a turning center with the flexibility of a 5-axis machining center.
High precision is supported by the direct measuring systems / glass scales. According to the machine data, direct measuring systems are installed in several axes, including X1/Y1/Z1/X2/Z2/Z3. This reduces the influence of mechanical transmission errors and supports highly accurate positioning ? an important quality factor, especially for complex milling operations, tight tolerances and demanding complete machining tasks.
Machine Highlights
Main spindle and counter spindle for productive multi-sided machining
Milling spindle HSK 63 with 12,000 rpm and 22 kW
B-axis ?110? for complex milling operations
Suitable for 5-axis simultaneous milling
Lower tool turret with driven tools
SLU2X turret-mounted steady rest, clamping range 8?101 mm
Ideal for shaft machining, slender workpieces and precision components
Direct measuring systems / glass scales in several axes
Siemens 840D sl Operate
80-position tool magazine
Internal coolant supply and chip conveyor
? Use the Ask for Price button and arrange an appointment by email with the responsible contact person to inspect the machine under power.
Highlights
Subject to prior sale and error excepted
Contact
Gläsener + Schmidt GmbH
Gewerbering 6
82140 Olching
+49 8142 4487-100
info@gs-wzm.de